Installing Wire-Free Motion Sensors

Mounting your Cync Motion Sensor.

Screw Mount

Recommended tools: 
Philips Screw Driver, Drill with 7/32 bit and a tape measure 

  1. Before installing, remove plastic battery tab on the motion sensor. Also be sure to separate the magnet and bracket so you can secure the bracket to the wall.
  2. Identify where you want to mount your Wire-Free Motion Sensor (Try the sensor in various locations to determine the ideal spot for your application. Recommended placing between 66-78” from the floor.)
  3. Mark the location for hole to be drilled.
  4. Using a 7/32” bit, drill hole in wall for mounting screw, insert anchor.
  5. Secure bracket to the wall until flush and seat magnetic mount.
  6. Mount sensor at desired angle.


Free Standing

  1. Motion sensor can be placed vertically or horizontally with the use of included magnetic mount
  2. Identify where you want to place your wireless motion sensor. Any level shelf or surface is an ideal location for your sensor
  3. Install motion sensor and rotate to ideal angle