Factory Reset Indoor Camera 

 
  1. Locate the pin hole on the back of the camera.
  2. Press and hold button for 3+ seconds.
  3. You can let go when the LED light turns red, which indicates the camera has been successfully reset.
 

null

 

 

Factory Reset Outdoor Camera 

 
  1. Determine the location of your pinhole based on your outdoor camera type. The Outdoor Battery Powered Camera pinhole can be located by removing the back cover. The Outdoor Wired Camera pinhole is located under the rubber stopper on the bottom of the camera.
  2. Press and hold button for 3+ seconds.
  3. You can let go when the LED light turns red, which indicates the camera has been successfully reset.
 
Outdoor Battery Powered CameraOutdoor Wired Camera

 

Related Articles

Topics Catalog

Cync App
Account + Settings
App Control
App + Firmware Updates
Cync Products
Light Bulbs
Light Strips
Light Fixture
Plugs
Switches
Cameras + Accessories
Thermostat + Sensors
Remotes + Motion Sensor
C-Reach
Voice Integrations
Compatibility
FAQs